Nano Contour Surface Z axis Instrument

    • The resolution of each stage is XY=0.1µm, Z=0.01µm.
    • Fast 3D Measurement, 1hour 20 minutes (conventional instruments) > 6 minutes per 128000 points
    • The highly sensitive autofocus sensor captures low levels of light refrected from the surface of the sample and directly measures steep angles and step heights.
    • The sample's color does not affect the measurement.
    • Unevenness of the reflection within spot diameter of the reflected laser beam is small.
    • Influence of the speckle noise is small.
    • Can be measure 2D and 3D , roughness.
  • CCMP1 - Chromatic Confocal Microscopy Point - 1 Technology Very flexible solution, allowing a mix of optics and magnifying, ideal for non-contact measurement of topography on all types of material. An objective colour L projects the image of a point source W along a continuum of monochromatic images located on the optical axis ("colour coding"). A sample placed in the area of colour coding shows the surface diffuse the incident light brush. Backscattered light through the lens colour L in the opposite direction and arrives at a hole P that filters all wavelengths except one, λM. The collected light is analyzed by a spectrograph S. The position of the sample is directly related to the wavelength detected λM. Trimos  proposes 14 different Optical Measurement products based on our 5 key technologies: CCMP1 (Chromatic Confocal Microscopy Point 1), CCMP2 (Chromatic Confocal Microscopy Point 2), DHM (Digital Holograhic Microscopy), WLI (White Light Interferometry) and CCML1 (Chromatic Confocal Microscopy Line).
  • CCMP2 - Chromatic Confocal Microscopy Point - 2 Technology An objective colour L projects the image of a point source W along a continuum of monochromatic images located on the optical axis ("colour coding"). A sample placed in the area of colour coding shows the surface diffuse the incident light brush. Backscattered light through the lens colour L in the opposite direction and arrives at a hole P that filters all wavelengths except one, λM. The collected light is analyzed by a spectrograph S. The position of the sample is directly related to the wavelength detected λM. Bigger numerical aperture (Slope) Small vertical resolution and large numerical aperture allows for accurate measurements on all types of material. Ideal for non-contact measurement of topography and layer thickness. Trimos  proposes 14 different Optical Measurement products based on our 5 key technologies: CCMP1 (Chromatic Confocal Microscopy Point 1), CCMP2 (Chromatic Confocal Microscopy Point 2), DHM (Digital Holograhic Microscopy), WLI (White Light Interferometry) and CCML1 (Chromatic Confocal Microscopy Line).
  • DHM - Digital Holographic Microscopy Technology Digital Holographic Microscopy (DHM) is the generation of computer images of a sample using holographic techniques. A hologram results from the interference between the object wave reflected from a sample and magnified by a microscope objective, and a reference wave. Using a laser source, the small angle between the waves exhibits fringes that carry the phase and amplitude information in a single image - the hologram which is captured on a digital camera in a few microseconds. The captured image is transmitted to a computer where numerical procedures are applied to reconstruct a 3D image of the sample. This process is called "image reconstruction". The innovation of the DHM™ patented technology is the intervention of digital processing at a level that had not been reached so far in microscopy. Trimos  proposes 14 different Optical Measurement products based on our 5 key technologies: CCMP1 (Chromatic Confocal Microscopy Point 1), CCMP2 (Chromatic Confocal Microscopy Point 2), DHM (Digital Holograhic Microscopy), WLI (White Light Interferometry) and CCML1 (Chromatic Confocal Microscopy Line).
  • CCML - Chromatic Confocal Microscopy Line Technology The chromatic confocal line sensor TRIMOS CCML1 offers an incredibly fast 3D measurement of 384.000 points per second with nanometric scale resolution. A robust and compact design, as well as outstanding dynamic range and an excellent signal to noise ratio, make the TRIMOS CCML1 the best measuring tool for all materials – including polished and highly tilted surfaces. With its unrivaled performance/price ratio, TRIMOS CCML1 is the best choice for ultrafast 3D inspection. Trimos  proposes 14 different Optical Measurement products based on our 5 key technologies: CCMP1 (Chromatic Confocal Microscopy Point 1), CCMP2 (Chromatic Confocal Microscopy Point 2), DHM (Digital Holograhic Microscopy), WLI (White Light Interferometry) and CCML1 (Chromatic Confocal Microscopy Line).
  • TR SCAN COMPACT WLI

    HIGH PRECISION NON-CONTACT SURFACE MEASUREMENT

    The new TR Scan Compact WLI range allows measurements on any type of material with sub-nanometric resolution. With its simplicity of use and small size it integrates easily in a lab environment and permit to realize quick and simple measurements.
    • Non-contact
    • Small footprint
    • Measuring range 400 µm
    • Resolution 0.1 nanometer
    • Extremely easy to use
    • 2.5x and 5x Michelson type optics for a wide field of view
    • Exchangeable optics, or mounted on a carousel
  • TR SCAN COMPACT Z

    MINI NON-CONTACT MEASURING COLUMN

    The new TR Scan Compact Z is a miniature height measuring column. It allows non-contact height measurements on all types of materials such as gold, soft surfaces, transparent surfaces etc.
    • Non-contact
    • Intuitive camera controls
    • Adjustable brightness
    • Height / delta / min / max measurements
    • Quick movements
    • Easy software
    • High accuracy
    • Measurements on moving parts
  • Optical Measurement Solutions

    - Turnkey solutions - Fully automatic, 24/7 use, 7 days a week - Dedicated to one or more specific measures - Fast non-contact roughness measurement - Measurement of geometry elements - Fast thickness measurement on all types of surfaces - Innovative vacuum fastening system - Multi sensors/sensors - Specific software according to the customer's request - Remote assistance - Ready for Industry 4.0 - Palletizing possible - Manual or automatic loading - Loading by a robot - Online CGK & RR calculation - Automatic saving of all measurement profiles - LOG export and automatic results - Exporting values in QDAS format - Fieldbus type: Profinet & Profibus